Air Pneumatic Heat Pressing Instructions (No Powder System)

Created by James Lemmer, Modified on Wed, 25 Oct 2023 at 11:23 PM by James Lemmer


A picture containing text, clipart 
Description automatically generated


Pneumatic/air heat press is necessary for this application. A high amount of pressure is required to apply the transfer to the substrate or garment. The high amount of pressure ensures that the no-powder DTF transfers into the weave of the textured substrate. Dual silicone pads are recommended in some applications. CobraFlex Printers & are dealers that recommend that you test every product before going into production as each item may have different characteristics. These settings below are a point of reference for application only. 



Product

Temp

Air-Pneumatic Heat Press

Pre-Press

Press-Transfer

Post-Press

100% Cotton

345 Degrees

140-150 PSI

20 Seconds

5 Seconds

None

50/50

345 Degrees

140-150 PSI

20 Seconds

5 Seconds

None

100% Polyester

345 Degrees

140-150 PSI

None

3 Seconds

None

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article