Cobraflex Electric Heat Press Instructions (Powder System)

Created by service Department, Modified on Wed, 25 Oct, 2023 at 7:43 PM by James Lemmer

A picture containing text, clipart Description automatically generated

Pneumatic/air heat press is necessary for this application. A high amount of pressure is required to apply the transfer to the substrate or garment. The high amount of pressure ensures that the no-powder DTF transfers into the weave of the textured substrate. Dual silicone pads are recommended in some applications. CobraFlex Printers & are dealers that recommend that you test every product before going into production as each item may have different characteristics. These settings below are a point of reference for application only.

Product	Temp	Dual Heat Press/With Dual Silicone Pads	Pre-Press	Press-Transfer	Post-Press
100% Cotton	285 Degrees	Max Pressure	Warm Platen	10-12 Seconds	3 Seconds
50/50	285 Degrees	Max Pressure	Warm Platen	10-12 Seconds	3 Seconds
100% Polyester	285 Degrees	Max Pressure	Warm Platen	10-12 Seconds	3 Seconds

Here is a link to show you how to adjust your unit to the max pressure....

https://drive.google.com/file/d/1rT7mHFe84FIfuUk6uyqKAHts7VG2veTo/view?usp=sharing