Cobraflex Electric Heat Press Instructions (No Powder System)

Created by James Lemmer, Modified on Thu, 2 May at 3:40 PM by Amy

A picture containing text, clipart
Description automatically generated

A pneumatic/air heat press is necessary for this application. A high amount of pressure is required to apply the transfer to the substrate or garment. The high amount of pressure ensures that the no-powder DTF transfers into the weave of the textured substrate. Dual silicone pads are recommended in some applications. CobraFlex Printers & are dealers that recommend that you test every product before going into production as each item may have different characteristics. These settings below are a point of reference for application only.

Product	Temp	Dual Heat Press/With Dual Silicone Pads	Pre-Press	Press-Transfer	Post-Press
100% Cotton	305 Degrees	Max Pressure 50-60	35 Seconds	20 Seconds	5 Seconds
50/50	305 Degrees	Max Pressure 50-60	35 Seconds	20 Seconds	5 Seconds
100% Polyester	275 Degrees	Max Pressure 50-60	None	10 Seconds	3 Seconds

Here is a link to show you how to adjust your unit to the max pressure....

https://drive.google.com/file/d/1rT7mHFe84FIfuUk6uyqKAHts7VG2veTo/view?usp=sharing