Air Pneumatic Heat Pressing Instructions (No Powder System)

Created by James Lemmer, Modified on Wed, 25 Oct, 2023 at 11:23 PM by James Lemmer

A picture containing text, clipart
Description automatically generated

Pneumatic/air heat press is necessary for this application. A high amount of pressure is required to apply the transfer to the substrate or garment. The high amount of pressure ensures that the no-powder DTF transfers into the weave of the textured substrate. Dual silicone pads are recommended in some applications. CobraFlex Printers & are dealers that recommend that you test every product before going into production as each item may have different characteristics. These settings below are a point of reference for application only.

Product	Temp	Air-Pneumatic Heat Press	Pre-Press	Press-Transfer	Post-Press
100% Cotton	345 Degrees	140-150 PSI	20 Seconds	5 Seconds	None
50/50	345 Degrees	140-150 PSI	20 Seconds	5 Seconds	None
100% Polyester	345 Degrees	140-150 PSI	None	3 Seconds	None