Cobraflex electric heat press instructions

Created by James Lemmer, Modified on Sun, 31 Jul 2022 at 12:25 PM by James Lemmer

 

 


A picture containing text, clipart 
Description automatically generated


Pneumatic/air heat press is necessary for this application. A high amount of pressure is required to apply the transfer to the substrate or garment. The high amount of pressure ensures that the no-powder DTF transfers into the weave of the textured substrate. Dual silicone pads are recommended in some applications. CobraFlex Printers & are dealers that recommend that you test every product before going into production as each item may have different characteristics. These settings below are a point of reference for application only. 



Product

Temp

Dual Heat Press/With Dual Silicone Pads

Pre-Press

Press-Transfer

Post-Press

100% Cotton

305 Degrees

Max Pressure 50-60

35 Seconds

20 Seconds

5 Seconds

50/50

305 Degrees

Max Pressure 50-60

35 Seconds

20 Seconds

5 Seconds

100% Polyester

275 Degrees

Max Pressure 50-60

None

10 Seconds

3 Seconds







Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article