Flexi Estimating Cost Setup

Created by service Department, Modified on Fri, 19 May 2023 at 08:34 AM by service Department

Flexi Estimating Cost Setup


Flexi has the ability to estimate costs per job. Right click on any Job in the Flexi Manager software.

Select Job Estimation from the drop down choices.


You must setup each ink color cost and the film cost. Select the 2nd tab over and create each ink color and set its cost. Start by adding the Cobra Film. Click the media box and select new to name the paper Cobra Film, set the cost. Once the film is setup, proceed to  setup all of the inks and powder glue.. 



Method Setting : Make sure area is selected for all entries.


Cobra Film : (.33) Cents Per Square Foot


Ink White :   (.05) Cents Per Square Foot 


Ink Adhesive :   (.10) Cents Per Square Foot 


Ink Cyan :   (.04) Cents Per Square Foot 


Ink Magenta :   (.04) Cents Per Square Foot 


Ink Yellow:   (.04) Cents Per Square Foot 

 

Ink Black :   (.04) Cents Per Square Foot 



So now that you have  all of the costs and inks setup, return to the 1st tab and use the automatic setting for the size, This estimates on the current Job what the dimensions of the film that is being utilized currently. Next select each check box that applies to your estimate and now you will see the total for the open Job. Feel free to add in new entries for tax or other company costs for estimating.






Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article