Head Replacement

Created by service Department, Modified on Mon, 15 Apr 2024 at 10:06 AM by service Department

Here are (3) videos that go over how to replace a new head. 


Be sure you take photo's of the top ribbon cable plug-in area's where the ribbons are plugged in, This will help you to re-plug back in the ribbon cables properly when you 
re-attach the new head.

Please watch all 3 videos, as they are staged to walk through each step in the process.


Also be sure that you have rags on hand when removing the dampeners from the old
head. Get a rag ready and remove the 4 dampeners from the top of the old head and
wrap a rag around them to secure any ink leaking out. 

Then cover each of the other heads with rags as well. This helps to protect the other heads from any random ink dropping out in the process of removing the old head.

Be sure to use new ribbon cables when replacing a new head.




Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article