White Alignment for the Gen 2 Printer

Created by service Department, Modified on Wed, 25 Oct, 2023 at 1:58 AM by James Lemmer

On the software under the Adjustment tab when looking at the Head Space Setting,


Vertical

You will notice that there is a Print Adjust button. One adjustment only.


Push the Print Adjust button.

It should print a chart showing you what number needs to be added to the current number in the H2 box. 


Vertical Test : Head Space

Horizontal

You will notice that there is a Left Print Adjust button and a Right Print Adjust button.

You will need to do both sides.


Push the left Print Adjust button 1st to do the left alignment 1st, once aligned, do the right side alignment next.
Each one should print a chart showing you what number needs to be added to the current number in the H2 box. 
H2 Left and H2 Right.



Horizontal Test : Head Space

They are not always the same number...Left could be 2 and right could be -3, it depends on the chart.

When you press the button a chart will be printed. Look at the chart and see which number is the best alignment.

If the number on the chart is showing Positive 3 as the best alignment choice, and your current number is  2 in the H2 Box currently, then add 3 to the 2 to get 5. 5 is the number you will input
into the  H2 Left and or H2 Right boxes depending on which side you're doing. 
If the box number is -2, and the chart says positive 4 is the  best alignment, then the new
calculation is the same, -2 + 4 = 2. Then 2 would be the new number to input into the  H2 Left and or H2 Right depending on which side your doing.

Do each side independently.

Print Adjust Left 1st
Print Adjust Right : 2nd



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article